Bolix N Deep-penetrating primer for absorbent and dusty substrates
Deep-penetrating primer for absorbent and weakened substrates.
Strengthens the substrate, evens out absorbency and improves the adhesion of subsequent layers.
Consumption: approx. 0.10–0.50 kg/m².
- strengthens the substrate,
- designed for highly absorbent substrates,
- improves adhesion to the substrate before the application of subsequent layers,
- reduces dusting and evens out substrate absorbency.
Ambient and substrate temperature during application and drying:
from +5°C to +25°C
Relative air humidity during application and drying:
up to 80%
Density:
approx. 1.00 g/cm³
(±10%)
Colour:
milky, colourless after drying
Drying time:
min. 4 h
BOLIX N is a deep-penetrating primer designed for substrate preparation before the application of subsequent finishing layers. It is particularly suitable for absorbent, dusty and weakened substrates where strengthening and stabilisation are essential.
The product penetrates the substrate structure, reduces and evens out its absorbency, and improves the adhesion of subsequent layers, such as renders, paints, adhesives or levelling mortars. It also reduces dusting and limits the risk of staining and contamination migration from the substrate.
Application scope includes, among others:
cement, cement-lime and gypsum plasters
concrete and aerated concrete
gypsum boards and floor screeds
reinforced layers in BOLIX thermal insulation systems
surfaces before painting and wallpapering
Key technical parameters:
consumption: approx. 0.10–0.50 kg/m²
density: approx. 1.00 g/cm³
drying time: min. 4 h
VOC content: ≤ 30 g/l
application: brush, roller or spray
For highly absorbent substrates, application in 2–3 layers is recommended using the “wet-on-wet” method. The product may be diluted with water for the first priming coat to facilitate deeper penetration.
The product is part of BOLIX systems, including the BOLIX INSIDE THERM thermal insulation system, and meets the technical requirements for system solutions.
For detailed application instructions and substrate preparation, refer to the technical data sheet.
