BOLIX MP KA 15 M Mineral render
-
- white – can be tinted on special request,
- high water vapour permeability – breathab
- part of BOLIX IZO-STROP ceiling insulation systems based on one-side bevelled mineral wool lamella boards.
Ambient and substrate temperature during application and setting:
from +5°C to +25°C
Relative air humidity during application and setting:
up to 80%
Density after mixing with water:
approx. 1.45 kg/dm³
Pot life of the prepared mortar:
≤ 2.0 h
BOLIX MP KA 15M is a thin-layer mineral render designed for machine application, typically intended for the BOLIX IZO-STROP ceiling-side insulation system based on mineral wool lamella boards. Its sprayed texture with a grain size of approx. 1.5 mm allows for an even, aesthetic surface when applied with a rendering machine.
The product is intended for spray application and is compatible with rendering machines using 6–8 mm nozzles, ensuring repeatable texture and high efficiency on large surfaces. Proper substrate preparation is essential – lamella boards require priming with BOLIX STG, which directly affects consumption and the final result.
Key parameters:
grain size: approx. 1.5 mm
consumption: approx. 2.0–3.0 kg/m²
water vapour permeability: category V2
water absorption: category W1
thermal conductivity coefficient λ: ≤ 0.47 W/(m·K), P=50%
pot life: up to 2 h
density after mixing with water: approx. 1.45 kg/dm³
colour: white
packaging: 25 kg
The render creates a breathable finishing layer compatible with mineral wool systems. Due to the application technology, experience in spray application and proper machine parameter settings are required.
The product is a BOLIX system component and is used in solutions covered by technical assessments, including ETA for BOLIX ETICS and special systems.
For detailed application instructions, application parameters and equipment requirements, refer to the technical data sheet.
